Non-Skid
Non-skid coatings are a cost-effective insurance to help prevent boxes from shifting during transport. Typically, non-skids are sprayed at the dry end of the corrugator and Enviro-Coatings manufactures custom built applicators to suit the uniqueness of each site. There are essentially three different types of Enviro-Grip products available: alumina, silica, and flexo applied.
Alumina based (Enviro-Grip 200A) is the most economical and commonly used non-skid. It is easy to use, clean up and it provides excellent resistance to sliding.
Silica based (Enviro-Grip 450S) is more commonly used when high graphic printing is present. Enviro-Grip 450S does not leave a haze when applied over colors and provides excellent resistance to sliding as well. Enviro-Grip 500S is the “easy-clean” version of Enviro-Grip 450S.
Enviro-Grip Flexo was specifically developed for flexo use, as it contains no abrasives that can damage expensive anilox rolls. Never use alumina or silica based non-skids on a flexo and never mix different types of non-skids together.
| Enviro-Grip 200A | economical, alumina based |
| Enviro-Grip 450S | silica based |
| Enviro-Grip 500S | silica based, easy to clean |
| Enviro-Grip Flexo | non-skid for flexo application |
